Electric Hot Knife, Hotshield Professional Handheld Electric Hot Knife Clasher and Heat Screen For Cutting, Rope, Canvas, Fabrics, With Tailor Foot, Tote Bag

Manual: 1. Press the handle to lift the gripping jaw 2. Perform the free end of the belt through the back of the tool under the jaw and leave about 1 cm overhang in front of the tool. 3. Wrap the strap around the charge 4. Take the end of the belt, which is still attached to the coil, and guide it through the knife housing and the shaft slot 5. Swing the handle to tension the strap 6. Place the seal on both bands and use the seal to crimping 7. Press the handle together to cut the strap DIFFERENT MATERIALS Bundling articles for handling and shipping: newspapers, pipes, lumber, concrete stones etc. Attaching objects to pallets, skids and boxes Reinforced wooden boxes, boxes and corrugated cardboard boxes like Gaylords Holding bales of agricultural products or textiles Fuse coils made of steel or paper

• - Hot knives cut the fabric, the rope and the styrofoam smooth and fast like butter, seal the edges clean and leave no residues! You can cut the foam plate or the foam block from each angle and bring it into the desired shape.
• - 50-500 ° C Stamp punch Temperature control: You can set the temperature with the stepless knob. Heat in 5 seconds. The temperature can be adjusted depending on the material. A better cutting effect is guaranteed.
• -The warm-up time is short. The hand-held electrothermal knife is heated by high current. The preheat time of this type of electrothermal knives is very short. High efficiency can reach red condition in a few seconds.
• - The fabric hot cutter is a wonderful tool with a good cutting effect. After cutting, there is no rough ridge. The hot cutter is energy saving and easy to use. Can be cut according to different materials to adjust the relative temperature.
• - suitable for commercial and industrial use, for cutting canvas, synthetic fabrics, fabrics, ropes and cords, light foam, KT plate pink foam, polyurethane, polyethylene, expanded polystyrene (EPS) and extruded polystyrene (XPS), styrofoam, polyester foam , Sponge, rubber etc.