Case of 6 Zipper Access Door for Shrink Wrap Project Access 36" x 72" - Clear

Zipper Access Doors are a shrink wrap accessory added to the shrink wrapped product after the wrapping has shrunk. These doors allow access into your boat while it remains covered. Be sure to look at Mr. Shrinkwrap's Shrink Wrap Installation Supplies page for Crosswoven Strap, Vents, or other items you might need for your project. If you don’t have a heat tool, you can pick one out for yourself here, or you can Rent a Heat Tool from Mr. Shrinkwrap.

• You can place a Zipper Access Door on your shrink wrap project for continuous, on-demand access. Zipper Access Doors are designed with extra material around their edges that allow for the door to be taped to your wrap.
• Zipper doors provide easy access to areas under a shrink wrapped object. Opening and closing zipper doors is easier than zipping up a winter jacket. There's no hassle of lining up the two halves of the zipper.
• The zippers on these doors are always connected, even when the door is completely unzipped. These zipper doors are made from a material that looks similar to shrink wrap, but is not meant to be shrunk and it should not have heat applied to it.
• Your shrink wrap project must complete the shrinking process before you install your zipper door(s). Once the shrink wrap film is shrunk and cooled, you can eye up where you want the door to be installed.
• Installation of a zipper door is very easy. You'll need a shrink film knife, some shrink wrap tape, and depending on where you want your door, you may need a ladder.